Dura Grip Anti-Slip Epoxy Floor Paint

  • Ideal for Concrete, Wood, Metal, Fibreglass, Tiles & Stone
  • Extremely durable epoxy paint lasts a minimum of 2 years
  • Barefoot and paw-friendly semi-gloss textured non-slip finish
  • Can be applied on slippery surfaces indoors and outdoors
  • Every coating is protected by a 2-year manufacturer’s warranty

Amber ClearLight GreyMedium GreySandBlackSafety YellowWhiteSafety RedSafety BlueBrown
946ml3.8L

Quantity:


Frequently Bought Together: 


Key Information

Finish:

Textured Semi-Gloss


Coverage:

946ml - 7 to 10 square metres

3.8L - 28 to 35 square metres


Surface Types:

Concrete, Wood, Metal, Fibreglass, Tiles, 

Aluminium and most Natural Stone


Drying Time

2 to 4 hrs between coats and 24hrs full cure


Coats

2


Reapplication

Every 2 years

1. General Information


Dura Grip anti-slip floor, decking and staircase paint is an epoxy application specially designed to create an extremely durable non-slip coating on multiple surface types. The anti-slip paint coating is easy to maintain and can be used on interior or exterior floors, stairs or boat decks. 


Dura Grip non-slip paint solution is easy to apply like any standard roll-on paint and once dried has a semi-gloss finish. Not only does the anti-slip paint increase the traction of the surface, but at the same time, it is completely chemical resistant which makes it perfect for around swimming pools or in factories and warehouses containing chemical substances.  Dura Grip textured epoxy paint is perfect for use on diamond-plate metal ramps, boat decks, trailers, stairs, locker rooms, laundry rooms, wooden decking and other residential and industrial areas where non-slip protection is desired. 

The focus when developing the formula for our anti-slip paint was always around quality. We tested multiple variations of elements, including the range of slip resistance and durability time achieved with each type of non-slip formula. We had many options to choose from, including water-based solutions. Still, in the end, we decided to develop a non-slip epoxy paint that not only stopped slippery surfaces but also stood the test of time even under some of the harshest weather and working conditions. What we wanted to ensure is that even if the product came at a premium production cost, you could rest assured that the anti-slip coating would achieve the right slip resistance results and not peel or fade any time soon. 

Dura Grip anti-slip paint finish is completely barefoot-friendly and leaves a light grit feel giving increased grip for feet or even your beloved pet’s paws. Dura Grip anti-slip paint will take around 12 to 24 hours to dry and once completed will be water and stain resistant.  Each Dura Grip non-slip paint coating is protected by a 2-year manufacturer’s warranty.

Dura Grip Coating Examples:

Product Features:

Interior and Exterior Use


Increases Traction


Semi-gloss Finish


Easy to apply


Barefoot Friendly


Paw Friendly


Chemical Resistant

Product Video:

2. Application


Important - Please note that if using Dura Grip Clear on a very light or white surface a slight sepia tone may be visible once cured. Only apply Dura Grip outdoors if there have been a 2 to 3 dry days to ensure moisture has not collected below the surface or soaked in areas like grout lines. 

Surface Preparation varies by surface. Please download the full instructions for specific surface preparation instructions for the non-slip epoxy paint. Check weather conditions to be certain rain or dew is not imminent before the product has had the opportunity to dry fully after application.

Important - Never skip the test phase of the product. It is important to ensure that the final finish and look is what you want before applying to the entire area.

Test Phase: Dura Grip should be tested on a small inconspicuous area before full application. MIXING: Use paint shaker or hand stir to thoroughly mix before using. Stir occasionally during use. 

Application: Apply with a 3/8” nap roller in 1-2 coats (2 coats recommended). Using SlipDoctors 3/8” nap roller, apply Dura Grip in uniform coats applying with light even pressure. For best performance, avoid thick coats. Second coat should be applied at a right angle to the first coat.

Clean Up: While Dura Grip is still wet, equipment may be cleaned with soap and water. Once dried, equipment may be cleaned with a solvent such as xylene or toluene.

Download Treatment Instructions

Click here to download the full instructions in PDF format



other products to consider...

Polish Grip is an anti-slip coating for polished tiles especially marble and granite. Unlike with our other anti-slip coatings and treatments Polish Grip will ensure that your floors are safe and maintain their shine.  

Stone Grip is formulated to increase the slip resistance on tiles, concrete and most unsealed natural stone surfaces. Works in minutes this anti-slip floor treatment will keep you, loved ones or customers protected for up to 2 years. 

Deck Grip anti-slip floor coating and sealant not only increases the slip resistance of tiles, concrete and other stone but also seals the surface for further protection. Developed with UV and Chemical Resistance 

Floor Grip anti-slip coating has been specifically formulated to increase slip resistance on laminate, vinyl and woodfloors from slip & fall accidents. Added protection your floors from stains, water damage and scuffs.

Liquid error: Could not find asset snippets/spurit_occ2_theme_snippet.liquid

Net Orders Checkout

Item Price Qty Total
Subtotal £0.00
Shipping
Total

Shipping Address

Shipping Methods