SlipDoctors GripX is a durable anti-slip coating specifically formulated to increase the slip resistance on tiles, natural, stamped, and stained concrete, sealed surfaces, and most other natural stone. GripX is an easy-to-apply roll on coating that once cured has a semi-gloss textured finish.
Not only does GripX increase the slip resistance of the surface but at the same time will seal the tile or stone surface to prevent water damage, scuff marks and scratches. The textured grit finish is completely barefoot and paw-friendly making it perfect for slippery bathrooms, showers, kitchens or smaller kitchens, patios and balconies.
Thanks to the formulated UV protection GripX can also be used on slippery outdoor surfaces that may get a lot of sun during the summer days. The application is very simple, clean the surface and roll on 2 coats of GripX anti-slip coating to ensure the highest level of slip resistance and durability.
Every perfectly applied GripX coating will last a minimum of 2 years and is protected by a 2-year Manufacturer’s Warranty.
Surface Preparation: Clean surface using pH-neutral cleaner or power-wash, rinse and allow to dry thoroughly before application. Ideally the surface should have been dry for a few days to ensure there is no moisture trapped underneath before sealing. For best adhesion, the surface can be lightly sanded with a soft grit sandpaper or etched using SlipDoctors Maintain Grip.
If working with previously sealed surfaces any chipping or flaking should be sanded or scuffed to a sound surface. If the sealed surface is sound, lightly sand with a soft grit sandpaper to promote adhesion. Scrub and clean surface with pH-neutral cleaner. Rinse thoroughly and allow to dry before application. GripX cannot be applied over wood, synthetic, or painted surfaces.
TEST – GripX should be tested on a small inconspicuous area before full application
Vigorously shake the bottle for 2 to 3 minutes . Pour the anti-slip coating into a container and mix well to ensure there is no clumping of the texture. GripX anti-slip coating needs to be rolled on to the surface using a high-quality lint free paint roller. Always apply 2 coats to every surface to ensure the highest level of durability. Allow the first coat to dry for 2-4 hours before applying the second coat. The second coat should be applied at a right angle to the first coat.
GripX requires 6 to 12 hours to cure for light traffic and 24 hours to cure for normal traffic.