Premier Seal Anti-Slip Sealer for Concrete, Paving & Decking
Regular price£170.00
- PROFESSIONAL ANTI-SLIP SEALER WITH SURFACE PROTECTION
Premier Seal is a durable acrylic anti-slip sealer designed to improve grip while sealing and protecting concrete, paving slabs, masonry, sealed tile, composite decking and previously coated surfaces from water, staining, chemicals and weather damage. - IDEAL FOR PATIOS, DRIVEWAYS, GARAGES & COMMERCIAL AREAS
Suitable for patios, garden paths, driveways, garage floors, pool surrounds, composite decking and commercial kitchens where improved slip resistance and long-term surface protection are required. - ENHANCED TRACTION UNDERFOOT
Formulated to provide reliable anti-slip performance across a wide range of surfaces while maintaining a clean, professional finish. - MATTE OR GLOSS FINISH AVAILABLE
Choose a subtle Matte finish for a natural low-sheen appearance or a Gloss finish to enhance the look of the surface while maintaining slip resistance. - WEATHER, UV & CHEMICAL RESISTANT DURABILITY
Built to withstand demanding environments and changing weather conditions, helping to protect against moisture penetration, staining and surface wear.
- 3.8 Litre: Up to 20 m²
- For outdoor use, review the forecast and only apply when conditions are stable. Make sure no rain or heavy dew is expected while the coating is curing. Avoid late-day applications when temperatures drop, and allow extra drying time in cool or humid weather. Do not apply if conditions are at or close to the dew point.
- The surface must be completely dry and properly cleaned. Remove grease, wax, dirt, loose paint, and any other residues that could prevent adhesion. If there is failing paint, strip it back to a sound base before coating.
- Mixing: Do not dilute. Stir thoroughly from the bottom of the container using a drill mixer or strong hand mix before starting, and remix each time you pour into a tray to keep the additive evenly dispersed.
- Test Patch: Always test on a small, hidden area first. Let it cure fully, then check appearance and performance before proceeding with the full application.
- Application: Apply with a quality roller to create an even coat and avoid build-up in low spots. If pooling occurs, roll it out immediately. For best results, apply two light coats rather than one heavy coat. Allow 6–8 hours between coats and roll the second coat at 90 degrees to the first. After the final coat, allow around 24 hours before normal foot traffic.
