Deck Grip Anti-Slip Coating & Sealant for Tiles, Concrete and Natural Stone
Regular price£165.00
▶
- Clear Semi-Gloss Finish: Offers a transparent, non-yellowing finish that enhances the appearance of your surfaces.
- UV and Chemical Resistant: Water-based acrylic sealer withstands UV rays, harsh chemicals, de-icing salts, and chlorine.
- Quick Drying and Non-Toxic: Dries quickly without emitting harmful fumes or toxic chemicals, ensuring a safe application.
- Extensive Coverage: One 3.8 litre bottle covers up to 50 square metres, making it an economical option for large areas.
- Versatile Application: Suitable for a wide range of surfaces, including concrete, brick, stone, tiles, and more, both indoors and outdoors.
- 3.8 Litre: Up to 50 Square Metres
NOTES
- Read product label and Technical Data Sheet (TDS) thoroughly before application to review safety precautions, surface preparation, and full application instructions.
- Videos are available to illustrate basic application instructions.
- Always wear the recommended safety equipment and follow safety precautions.
- Important: Paint roller is not included in the UK. This must be purchased separately.
- Surface preparation varies by surface. Please review the TDS for detailed information.
- All substrates must be clean, dry, and free of dust, dirt, oil, grease, soil, soap residue, wax, flaking paint, and other soluble contaminants.
- Deck Grip should not be thinned in any way.
- Pour one gallon of Deck Grip into a separate container. Open the bottle of the included Deck Grip Additive and pour entire contents into the container with the Deck Grip. Mix thoroughly for even distribution. Stir often during application to ensure consistent Additive distribution.
- A sample test is recommended to assure maximum performance and suitability for the intended use. Test product in an inconspicuous area and allow to fully cure to test results.
- The Deck Grip mixture should be applied by rolling. Use a high-quality paint roller to evenly coat the surface. Avoid puddling in low areas. If puddles occur, roll them out immediately.
- Applying two thin coats is recommended rather than one thick coat. Wait 2-4 hours between coats. Roll the second coat at a right angle to the first coat.
- Dry times: Allow 6-12 hours for foot traffic and 24 hours for wheel traffic.
- CLEAN UP: While Deck Grip is still wet, application equipment can be cleaned with soap and water. Mixed material should be used or discarded.
- For general cleaning, use a pH-neutral cleaner to scrub lightly with a soft bristle deck grush or use a low-pressure rinse.
- Avoid using alcohol-based cleaners.
