Stone Grip Anti-Slip Tile, Concrete & Stone Treatment

Price:

£140.00
inc VAT


Features:


  • The ultimate non-slip tile treatment to increase the slip resistance on stone
  • Drastically increases traction in minutes on outdoor & indoor floors and steps
  • Change your slippery tiles to anti-slip with an easy application of only 5 to 15 min
  • Ideal for bathrooms, kitchens, gardens, patios - barefoot, and paw-friendly 
  • The new slip resistant tile and stone floor or stairs will last up to 2 years


Size:

Quantity:

BULK DISCOUNT: 

2+ Units = 5% Off

5+ Units = 10% Off



Shipping:

Free: 1 to 2 Working Day

Key Information

Finish:

Matte


Colour:

Transparent - No change to look of floors


Coverage:

1 Litre - 10 Square Metres

5 Litres - 50 Square Metres


Surface Types:

Porcelain, ceramic, terrazzo, quarry, slate, brick, travertine, concrete and many other stone or mineral surfaces. 


Drying Time

Treatment can be completed in 8 to 15 minutes


Reapplication

Every 2 years

1. General Information


Stone Grip Non-Slip Tile Floor Treatment for Ceramic tiles, Porcelain, Concrete and other stone surfaces is a fast-acting anti slip solution that increases your slippery floor’s traction in minutes

Stone Grip non-slip tile and floor treatment has a clear finish that will make little to no appearance change and eliminate slippery floors even when wet. Stone Grip anti-slip treatment for tiles, concrete and unsealed natural stone is industrial strength and can be used in high-traffic areas to prevent slip-and-fall accidents. Stone Grip can be used on virtually any indoor or outdoor tile or stone surface and has been certified for use on floors in and around food processing areas. If you need an non-slip tile for an indoor or outdoor area then Stone Grip non-slip tile treatment is the answer. 

Have a large Porcelain/Enamel shower or bathroom tile floor that is dangerous and slippery? Stone Grip can also be used on shower floor tiles or create non-slip bathroom tile flooring to ensure that you, your loved ones or customers are always safe from slip-and-fall accidents. If you need a smaller bath or shower floor solution make sure to see the SlipDoctors Bathtub and Shower anti slip treatment. If your shower or bath is made of Fibreglass or Acrylic, then the best solution you can find on the market is SlipDoctors Tub Grip anti slip coating. 

The entire process to achieve an anti-slip tile flooring can be completed within 15 minutes. Once applied Stone Grip’s non-slip treatment will be micro-etched into the surface for up to 2 years. Stone Grip cannot be used on synthetic floors such as Vinyl, Lino or Laminated floors, click here if you require non-slip vinyl and wood spray or coating

If you want to seal the surface and increase traction then you would need to use our non-slip coating Deck Grip

Product Features:

Interior and exterior use


Water-based treatment


Easy to apply


Increases the coefficient of friction


Minimal or no appearance change


Low odour


Immediate use after application

How to Test:

How to Apply:

2. Application


Prepare the Neutralizer: Fill a bucket or small tank sprayer with clean tap water. Add one or two tablespoons of baking soda per gallon of water and mix well. Set aside to use when needed. Surface Preparation: Thoroughly clean the surface to be treated prior to treatment using a pH-neutral or slightly acidic cleaner. For new floors, make sure all grout residues are removed from the tiles. The floor may need to be rinsed multiple times to remove all former cleaning products. Note: If there is a topcoat sealer on the floor, it should be removed before treatment is started. Stone Grip is compatible with most Penetrating Sealers.


Sample Testing: Before initial treatment, test on one tile in an inconspicuous area of your floor. Thoroughly clean and dry the test tile. Spread a small amount of the solution completely over the test tile and note the time. Every 30 seconds use a rubber-soled shoe to apply downward pressure and try to slide the shoe along the treated surface. DO NOT LET STONE GRIP DRY ON THE SURFACE. When you feel you have achieved the level of slip resistance you desire, rinse the test tile with the prepared neutralizer. Make note of the total amount of time you left the solution on the tile. Typically, this time will be between 5-15 minutes. This is not a case where longer treatment time is better. It is important not to over-treat the surface. As soon as there is a reasonable resistance to the pressure of the shoe, you should apply the neutralizer. You can perform multiple tests if you are unsure of the initial test results.


Review Test Results: Once you have achieved an acceptable level of slip resistance and applied the neutralizer, thoroughly rinse, and dry the test tile and inspect it carefully to determine if there is any visible change in appearance. If there is a visible change, you can perform another test on a different untreated tile and reduce the treatment time. Continue the testing process as before and inspect the new results. Once you are satisfied with the test results, you are ready to treat the remaining floor area. Please contact SlipDoctors Technical Support for assistance.


Apply to Remaining Floor Area: Spread Stone Grip using a tank sprayer or bucket and applicator on an area ONLY as large as can be covered and subsequently neutralized consistent with the treatment time determined by the testing process. Reminder: Do not let Stone Grip dry on the surface. Do not pour directly on the surface. It may be necessary to divide large areas into smaller sections for effective application. After the section has been treated for time determined in the testing process, apply the neutralizer. Repeat process for all sections until the entire floor has been treated. Thoroughly rinse entire treated area with clean water and dry with wet vacuum or squeegee.


Important: Avoid solution contact with all metal, wood and glass surfaces. If possible, remove these items temporarily from the area to be treated; or use waterproof duct tape or plastic to fully cover these surfaces. Use special precaution with drain covers in a shower, bathtub or wet area. When receiving, storing or opening the container, keep the container on the surface that is to be treated in case of a spill. Do not set bottle on countertops. Always use towels on ground to avoid spills.

Download Treatment Instructions

Click here to download the full instructions in PDF format


Download SDS Data Sheet

Click here to download the full SDS Data Sheet