Ultra Grip Extreme-Traction Ramp Paint

• Extreme Textured Finish for Ramp Safety: Engineered to deliver the most aggressive anti-slip surface available in the UK, Ultra Grip helps prevent slips on sloped access points, wheelchair ramps, loading ramps and vehicle ramps.
• Cold Weather Formula – Cures from 4°C: Specially designed for cooler UK climates, this low-temperature cure version ensures reliable performance on outdoor and indoor ramps where other coatings may fail.
• Multi-Surface Ramp Compatibility: Adheres to concrete, wood, aluminium, fibreglass and steel, making it ideal for access ramps, loading ramps, warehouse ramps and outdoor sloped walkways that demand industrial-grade traction.
• Exceptional Durability and Weather Resistance: Built to withstand heavy footfall, wheelchairs, trolleys, vehicles and exposure to harsh UK weather conditions, ensuring long-lasting performance without frequent reapplication.
• Complete Kit with Phenolic Roller Included: Each tin comes with a professional-grade phenolic roller, chosen to create the optimal textured finish on ramps and to make application fast and effective.

• Phenolic Roller: approx. 2.8 - 3.7 m² per 3.8 Litre
• Trowel/Squeegee: approx. 3.7 - 4.6 m² per 3.8 Litre

Ultra Grip Non-Skid Epoxy Paint provides maximum traction and safety on all types of ramps, making it the leading choice for commercial, industrial and outdoor use. Specially designed for cold weather application as low as 4°C, this advanced anti-slip coating creates a tough textured finish that helps prevent slips and falls on sloped surfaces.

Ultra Grip is suitable for a wide range of ramp surfaces including concrete ramps, metal ramps, wooden ramps, fibreglass ramps and aluminium ramps. It is ideal for loading ramps, wheelchair access ramps, vehicle ramps, warehouse ramps and outdoor sloped walkways where reliable grip is essential.

The ultra durable epoxy finish resists chemicals, heavy traffic and harsh UK weather conditions, ensuring long lasting performance indoors and outdoors. Whether you are improving health and safety compliance or protecting users on access ramps, Ultra Grip Non-Skid Paint offers the highest level of slip resistance available on the UK market.

Upgrade the safety of your ramps today with Ultra Grip Ramp Paint and create a slip resistant surface that stands the test of time.

• Please carefully read the product label and Technical Data Sheet (TDS) before starting your application to ensure safety, correct surface preparation, and full application guidance.
• Instructional videos are available to help demonstrate the basic application steps.
• Always wear the appropriate personal protective equipment and adhere to all safety recommendations.
• Colour shades may vary slightly between batches. To ensure a uniform finish, it is recommended to blend contents from different batch numbers before use.

• Preparation requirements differ depending on the surface type. Refer to the TDS for full surface-specific preparation details.
• Application temperature range: 4-27°C.
• Ensure the substrate has been properly prepared before applying. Failure to do so may result in poor adhesion or coating failure.
• All sealants, oil, grease, chemical residues, and other contaminants must be thoroughly removed.
• Surfaces must be structurally sound, clean, and completely dry before application.

• Do not coat expansion joints. Avoid application if the surface temperature is within 5°C of the dew point.
• Always test a small patch in an inconspicuous area before full application.
• Mix ratio is 4:1 by volume - combine four parts Base (Part A) with one part Hardener (Part B). Use a 400-600 RPM explosion-proof drill fitted with a Jiffy mixer.
• Agitate both Part A and Part B separately before combining. Use the mixture immediately-no induction time is required. Thinning is not advised.
• POT LIFE @ 24°C is approximately 60 minutes.
• Applying with a phenolic roller will create a consistent ridged texture. A smoother finish can be achieved using a trowel or squeegee.
• After mixing, pour a ribbon of material approximately 60-90 cm long and 15 cm wide onto the surface to begin application.
• Phenolic Roller: Pull the material towards yourself with moderate pressure. Avoid over-rolling as this may reduce slip resistance. Roll in a single direction only and smooth out any build-up along the roller edges. Coverage: approx. 2.8-3.7 m² per gallon.
• Trowel/Squeegee: Dispense a ribbon approximately 60-90 cm wide. Hold the trowel or squeegee at a 45° angle and draw the product toward you, maintaining an even layer. Coverage: approx. 3.7-4.6 m² per gallon.
• CLEAN UP: Clean spills, tools, and equipment promptly using white spirit or a suitable paint thinner.